Queries the monitoring data of a secondary elastic network interface (ENI) over a specific period of time.
Operation description
Usage notes
The monitoring data of a secondary ENI includes the amount of traffic sent and received over the internal network, the number of packets sent and received by the secondary ENI, and the number of sent and received packets that are dropped by the secondary ENI. Specific information may be missing from the returned monitoring data. This may be because the system cannot obtain the relevant information. For example, if the instance to which the secondary ENI is attached is in the Stopped state or if the secondary ENI is not attached to an instance and is in the Available state, the monitoring data of the secondary ENI cannot be obtained. Take note of the following items:
- Up to 400 monitoring data entries can be returned at a time. Make sure that the
TotalCount
value does not exceed 400. The value is calculated by using the following formula:TotalCount = (EndTime - StartTime)/Period
. If the TotalCount value is greater than 400, theInvalidParameter.TooManyDataQueried
error is returned. - You can query the monitoring data in the last 30 days. If the value of
StartTime
is more than 30 days earlier than the current time, an error is returned.
Debugging
Authorization information
Request parameters
Parameter | Type | Required | Description | Example |
---|---|---|---|---|
EniId | string | No | The secondary ENI ID. By default, all secondary ENIs that are bound to the specified instance are queried. | eni-bp19da36d6xdwey**** |
RegionId | string | Yes | The region ID. You can call the DescribeRegions operation to query the most recent region list. | cn-hangzhou |
InstanceId | string | Yes | The ID of the instance to which the secondary ENI is bound. | i-bp1a5zr3u7nq9cx**** |
StartTime | string | Yes | The beginning of the time range to query. Specify the time in the ISO 8601 standard in the yyyy-MM-ddTHH:mm:ssZ format. The time must be in UTC. If the value of seconds (ss) is not 00, the time is rounded up to the next minute. | 2018-05-21T12:19:00Z |
EndTime | string | Yes | The end of the time range to query. Specify the time in the ISO 8601 standard in the yyyy-MM-ddTHH:mm:ssZ format. The time must be in UTC. If the value of seconds (ss) is not 00, the time is rounded up to the next minute. | 2018-05-21T12:22:00Z |
Period | integer | No | The interval at which to retrieve monitoring data. Unit: seconds. Valid values:
Default value: 60. | 60 |
Response parameters
Examples
Sample success responses
JSON
format
{
"TotalCount": 4,
"RequestId": "473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E",
"MonitorData": {
"EniMonitorData": [
{
"PacketRx": "0",
"TimeStamp": "2018-05-21T03:22:00Z",
"DropPacketRx": "0",
"EniId": "eni-bp19da36d6xdwey****",
"DropPacketTx": "0",
"PacketTx": "0",
"IntranetTx": "0",
"IntranetRx": "0"
}
]
}
}
Error codes
HTTP status code | Error code | Error message | Description |
---|---|---|---|
403 | InvalidStartTime.Malformed | The specified parameter "StartTime" is not valid. | - |
403 | InvalidEndTime.Malformed | The specified parameter "EndTime" is not valid. | The specified EndTime parameter is invalid. |
403 | InvalidPeriod.ValueNotSupported | The specified parameter "Period" is not valid. | - |
403 | InvalidStartTime.TooEarly | The specified parameter "StartTime" is too early. | - |
403 | InvalidParameter.TooManyDataQueried | Too many data queried. | - |
403 | Throttling | Request was denied due to request throttling. | - |
403 | InvalidInstanceType.NotSupportCredit | The InstanceType of the specified instance does not support credit. | The instance type does not support burstable instances. |
403 | InvalidParameter.EndTime | The specified parameter EndTime is earlier than StartTime. | The end time cannot be earlier than the start time. |
404 | InvalidDiskId.NotFound | The DiskId provided does not exist in our records. | The specified disk does not exist. Check whether the disk ID is correct. |
4003 | InvalidParam.Malformed | The specified parameter "EniId" and "InstanceId" are not valid | - |
For a list of error codes, visit the Service error codes.